RAKE GRUVA (H0e) × MODELLJÄRNVÄGAR

Rake Gruva En väldigt liten anläggning i skala H0e

Följ hur den byggdes "dag för dag":

En introduktion × 1 × 2 × 3 × 4 × 5 × 6 × 7 × 8 × 9 × 10 × 11-13 × 14 × 15 × 16 × 17 × 18 × 19 × 20-24 × 25+26 × 27 × 28 × 29 × 30-34 × 35 × 36 × 37 × 38-40 × 41-54 × 55-61 × 62-72 × 73-76 × 77+78 × 79-83 × 84 × 85+86 × 87 × 88-90 × 91+92 × 93 × 94-98 × 99-106 × 107-112 × 113 × 114 × 115 × 116-121 × 122+123 × 124-130 × Dagen då den blev "färdig" × De senaste bilderna

Dag 3
5:e januari 2001    Föregående dag × Nästa dag

Zoom in 541 Kb
I tried to paint the finished part of the wall from yesterday with a liquid wood stain. It was time-consuming and the wall looked a little like it was made out of one piece of wood. So I took a sponge from the kitchen and cut a small piece out of it and used it to prestain all the wood before cutting and assembling it.
 
Zoom in 497 Kb
To the left is the finished wall painted with wood stain and to the right are the four parts behind the engine peiced together with prestained wood. The difference is quite clear.
 
Zoom in 196 Kb
Here is the construction from above.
 
Zoom in 495 Kb
I used an "antique oak" colored waterbased wood stain.